P319
Strap Qualities:
Polypropylene (PP) & Polyester (PET)
Strap Dimensions:
8.0 - 13.0 x 0.35 - 0.80 mm
Weight:
3.75 kg (including battery)
Avg.
Seal Strength:
Up to 75% (dependent on strap quality)
Strap Tension:
150 - 800 N, dependant on strap quality
Battery:
12VDC /2.4 Ah NiCd
12VDC /3.0 Ah NiMH
|
P324
Strap Qualities:
Polypropylene (PP) & Polyester (PET)
Strap Dimensions:
10.0 - 16.0 x 0.40 - 1.05 mm
Weight:
4.1 kg (including battery)
Joint:
Friction weld joint with approximately 75% average joint strength,
dependent on on strap quality.
Strap Tension:
300 - 2400 N, dependant on strap quality
Battery:
14.4VDC /2.4 Ah NiCd
14.4VDC /3.0 Ah NiMH
Charger:
Both types of battery (NiCD and NiMH) can be charged with the same
standard charger. Now you can choose between Standard, Turbo and Mobile
chargers; contact your specialist for detailed advice.
Suspension:
Due to its low weight the tool does not have to be suspended. However,
depending on the area of the application, suspension can be
advantageous. Two different types of suspension brackets are available.
Bottom base wearing plate:
Packaged goods with a rough and uneven surface can result in excessive
wear to the base plate. The optionally available bottom base wearing
plate can provide additional protection against wear.
|
P325
Strap Qualities:
Polypropylene (PP) & Polyester (PET)
Strap
Dimensions:
16.0 - 19.0 x 0.40 - 1.35 mm
Weight:
4.4 kg / 9.6 lbs
Joint:
Friction weld joint with approximately 75% average joint strength,
dependent on strap quality.
Strap Tension:
650 - 3500 N, dependant on strap quality
Battery:
14.4VDC /2.4 Ah NiCd
14.4VDC /3.0 Ah NiMH
Charger:
Both types of battery (NiCD and NiMH) can be charged with the same
standard charger. Now you can choose between Standard, Turbo and Mobile
chargers; contact your specialist for detailed advice.
Suspension:
Due to its low weight the tool does not have to be suspended. However,
depending on the area of the application, suspension can be
advantageous. Two different types of suspension brackets are available.
Bottom base wearing plate:
Packaged goods with a rough and uneven surface can result in excessive
wear to the base plate. The optionally available bottom base wearing
plate can provide additional protection against wear.
|
